Weldability of Metals and Alloys金属焊接性 知到智慧树答案2024 z28456

第一章 单元测试

1、 With carbon equivalent ( ), the steel has a low tendency to harden and cold cracking?

A:less than 0.50%
B:less than 0.80%
C:less than 0.60%
D:less than 0.40%
答案: less than 0.40%

2、 ( ) is not a factor that affects weldability.

A:operation skill
B:chemical composition
C:joint type
D:Welding process
答案: operation skill

3、 The calculation formula of carbon equivalent of the IWS considers the influence of () on weldability.

A:chemical composition
B:diffusion hydrogen
C:welding process
D:welding structure&nbsp
答案: diffusion hydrogen,welding process,welding structure&nbsp

4、 Maximum crack distance has been used to allow more accurate determination of the cracking ( ) range.

A:strength
B:toughness
C:size
D:temperature
答案: temperature

5、

Weldability is not easily quantified, and can depend on a variety of factors, including  ( ).

A:operator and welder
B:physical specifics of the joint
C:welded structure
D:welding method
答案: physical specifics of the joint,welded structure,welding method

第二章 单元测试

1、 The weldability of high-carbon steel is worse than that of low-carbon steel because high-carbon steel is with ( ).

A:higher carbon content
B:lower melting point
C:higher sulphur content
D:higher toughness
答案: higher carbon content

2、 Normally, because of auto-tempering, the postweld microstructure of QTLA steel is ( ).

A:high carbon martensite
B:tempered martensite
C:ledeburite
D:upper bainite
答案: tempered martensite

3、 QTLA steel is not susceptible to solidification cracking because it is with ( ).

A:low impurity content
B:low carbon content
C:low manganese content
D:low nickel content
答案: low impurity content,low carbon content

4、 For HTLA steels, chromium is able to ( ).

A:decrease toughness of HTLA steels
B:increase toughness of HTLA steels
C:increase hardeness of HTLA steels
D:decrease hardeness of HTLA steels
答案: decrease toughness of HTLA steels,increase hardeness of HTLA steels

5、 When you weld HTLA steels, you’d better to take advantage of auto-tempering.

A:对
B:错
答案: 错

6、 Auto-tempering occurs after welding when ( ).

A:peak temperature is high
B:Ms is high
C:carbon content of weld is low
D:cooling rate is slow
答案: carbon content of weld is low,cooling rate is slow

7、 Before designing welding procedure, we’d better to analyze the weldability of the workpiece.

A:对
B:错
答案: 对

8、 To remedy the underbead cracking, we need to reduce cooling rate when we weld oil engine connecting rod.

A:错
B:对
答案: 对

9、 If the carbon content of a type of steel is 0.1%, this steel is a kind of ( ).

A:medium-carbon steel
B:HTLA steel
C:high-carbon steel
D:low-carbon steel
答案: low-carbon steel

下方是付费阅读内容：本平台商品均为虚拟商品，无法用作二次销售，不支持退换货，请在购买前确认您需要购买的资料准确无误后再购买，望知悉！

完整答案需点击上方按钮支付5元购买,所有答案均为章节测试答案，无期末答案。购买后上方矩形框将出现已付费的隐藏内容。

不知道怎么购买？点此查看购买教程！